Project

General

Profile

Bug #669

The Box command doesn't draw in the proper colors, and the lines are too thick.

Added by Brian Flanagan about 3 years ago. Updated almost 3 years ago.

Status:
Feedback
Priority:
Low
Target version:
-
Start date:
02/19/2021
Due date:
% Done:

0%

Estimated time:
1:00 h
Affected version:

Description

In the following example, the boxes drawn should be drawn using the same high intensity color that I see on the Plot statements used in the corners of each box:

Screen Scale 0,3,3 ' Zoom in to see the detail

Dim X(72),Y(72)
For i=1 TO 72
    Read X(i),Y(i)
Next i
Data   1,0,   1,20,   1,40,   1,60,   1,80,   1,100,   1,120,   1,140,   1,160
Data  21,0,  21,20,  21,40,  21,60,  21,80,  21,100,  21,120,  21,140,  21,160
Data  41,0,  41,20,  41,40,  41,60,  41,80,  41,100,  41,120,  41,140,  41,160
Data  61,0,  61,20,  61,40,  61,60,  61,80,  61,100,  61,120,  61,140,  61,160
Data  81,0,  81,20,  81,40,  81,60,  81,80,  81,100,  81,120,  81,140,  81,160
Data 101,0, 101,20, 101,40, 101,60, 101,80, 101,100, 101,120, 101,140, 101,160
Data 121,0, 121,20, 121,40, 121,60, 121,80, 121,100, 121,120, 121,140, 121,160
Data 141,0, 141,20, 141,40, 141,60, 141,80, 141,100, 141,120, 141,140, 141,160
Data 161,0, 161,20, 161,40, 161,60, 161,80, 161,100, 161,120, 161,140, 161,160

' 16 x 9 = 90 + 54 = 144
Palette 0,$FFFFFF,$FF0000,$00FF00,$0000FF,$FF00FF,$FFFF00,$00FFFF,$FF7700,$00FF77,$7700FF,$FF0077,$77FF00,$0077FF
Cls 0 : Ink 1
N=1
For N=1 To 72
    Ink N Mod 10 + 2
    Box X(N),Y(N)+1 To X(N)+16,Y(N)+16+1
    Plot X(N),Y(N)+1 ' should be full intensity color
    Plot X(N)+16,Y(N)+16+1 ' should be full intensity color
    Plot X(N)+16,Y(N)+1
    Plot X(N),Y(N)+16+1
Next N
// Each of the boxes printed should be drawn in the same full intensity color as the corner dots. 
// Apparently, Plot is using the correct color, but Box, Draw, etc. are shown in much lower intensity.
// Also, the lines drawn for the box are too thick!
#1

Updated by Brian Flanagan about 3 years ago

  • Affected version changed from 1.0.0 (B3) to 1.0.0 (B5)

Re-tested in 1.0.0 (B5)
Still fails.

#2

Updated by Francois Lionet almost 3 years ago

  • Status changed from New to Feedback
  • Assignee set to Francois Lionet

Will be solved when I make the new drawing routines.

#3

Updated by Brian Flanagan almost 3 years ago

  • Affected version changed from 1.0.0 (B5) to 1.0.0 (B7)

Thanks, Francois!

Partially fixed! The line thickness issue appears to have been corrected.
The color intensity is still a problem. (I'll be glad to see the new renderer when it's ready!)

Also available in: Atom PDF