AOZ Studio Beta

If I change the above example to where each bank is loaded into a particular bank, it works:

#manifest: "amiga"

Load "AMOSPro_examples:Objects/Faces_A.abk",2
Print "Bank A loaded into bank 2."
List Bank

Load "AMOSPro_examples:Objects/Faces_B.abk",3
Print "Bank B loaded into bank 3."
List Bank

Load "AMOSPro_examples:Objects/Faces_C.abk",1
Print "All banks loaded."
List Bank

After more careful testing, I determined that it wasn't the second Load causing the problem, but rather the second Swap. (I changed the bug title accordingly.)

Load "AMOSPro_examples:Objects/Faces_A.abk" : Rem Success
Bank Swap 1,2 : Rem Success
Load "AMOSPro_examples:Objects/Faces_B.abk" : Rem Success
Bank Swap 1,3 : Rem FAIL!

The bank swap problem is corrected.
Yet, this example does not display the sprites properly: for the moment, rainbows are done by remapping colors based on their RGB values. The rainbow is set on color 0, which is black. As the bobs are ALSO black, they are part of the rainbow, and cannot be seen. This will be corrected when I have time to work on the renderers.

This is still broken in 0.9.6. The exact same example provided above still fails on the 2nd swap.

It causes a Magician Meditation error at the 2nd swap. ( Internal error at 16:1 )

Here's the problem code again:

#manifest: "amiga"

Load "AMOSPro_examples:Objects/Faces_A.abk"
Print "Bank A loaded."
List Bank

Print "Now swapping 1 & 2"
Bank Swap 1,2
List Bank

Load "AMOSPro_examples:Objects/Faces_B.abk"
Print "Bank B loaded."
List Bank

Print "Now swapping 1 & 3"
Bank Swap 1,3 ' <-- Fails here
List Bank

Load "AMOSPro_examples:Objects/Faces_C.abk"
Print "All banks loaded."
List Bank

Re-tested in 0.9.8.1. Still failx.
Gets a Magician Meditation error: Internal Error at 137:47

Help_78 from AMOSPro_Examples still fails on second Bank Swap

Retested. Although my small example works now, Help_78 is still failing on the second swap.